Fiber Injection System
This system for the Macropaver provides a fiber chopper, fiber storage and control systems for injecting fibers into the slurry or microsurfacing mix. Provides for up to 7 lbs./min. (3.2 kg/min.) fiber injection. The chopper cuts from 1 to 3 strands of fiberglass into 1/4" - 1" (6mm - 25mm) long pieces and feeds them into the aggregate as it enters the inlet hopper. The system turns on and off with Main Start. It is powered by the Macropaver main hydraulic sytem.
Last Updated (Tuesday, 17 July 2012 08:00)