Minimac CR-1000
Valley Slurry Seal continues to pioneer pavement maintenance equipment solutions by introducing the VSS Minimac CR-1000, the world's only compact slurry/microsurfacing machine with continuous run operation. Now contractors can have all the great features and benefits of the go-anywhere, highly respected Minimac® and take on larger jobs where continuous-run paving is an advantage or a requirement.
Versatility is the key to the compact Minimac CR-1000. The Minimac CR-1000 is uniquely suited for
- Supporting larger application machines on bigger jobs, such as the VSS Macropaver
- Tackling smaller, continuous-run projects.
- Operating in confined spaces, in a non-continuous mode, for parking lots, garages, driveways, footpaths, walkways, golf cart paths and other jobs where big machines and large crews aren't feasible or cost effective.
The Minimac CR-1000 is even more versatile since it can be driven from either end of the machine thanks to it's dual-drive system. This allows the driver to be located in the most optimum position for either continuous-run operation in the front or in the back for traditional slurry/microsurfacing.
The Minimac CR-1000 offers production rates of 1.5 tonnes/min. (1.65 tons/min.) or better.
This machine is feature-packed, begining with single, one- or two-man operation - two if in continuous run. Critical operations are controlled with a single joystick. Auto-sequencing assures consistent application of all slurry seal and other polymer microsurfacings. Material is thoroughly mixed automatically by a double shafted pugmill. It can also deliver material on grades up
to 15%. With a proper material staging, non-continuous operation loading takes as little as five minutes.
Request a quote
Specifications
|
Dimensions |
||
|
Total Unit Length |
8.08 m |
26.5 ft. |
|
Overall Width |
1.83 m |
6.0 ft. |
|
Overall Height |
2.24 m |
88 in. |
|
Wheelbase |
3.66 m |
144 in |
|
Unladen Weight |
8,165 kg |
18,000 lbs |
|
Maximum Gross Weight |
14,515 kg |
32,000 lbs |
|
Tire Size |
28 x 12.5 x 15 |
24 ply |
|
Vehicle Information |
||
|
Drive Train |
Hydrostatic 4 wheel drive |
|
|
Grade Ability |
15% grade |
|
|
Shuttle Ground Speed |
21 kph |
13 mph |
|
Turn Radius |
6.1 m |
20 ft |
|
Capacities |
||
|
Aggregate Capacity |
3 cu. m |
4 cu. yd. |
|
Emulsion Capacity |
1,173 liters |
310 gallons |
|
Water Capacity |
1,173 liters |
310 gallons |
|
Fines Capacity |
170 liters |
6.0 cu. ft. |
|
Additive Capacity |
246 liters |
65 gallons |
|
Fuel Tank |
170 liters |
45 gallons |
|
Hydraulic Reservoirs |
284 liters |
75 gallons |
|
Performance |
||
|
Pugmill Output |
1.5 tonnes/min. |
1.65 tons/min. |
Features
- Automatic start/stop materials sequencing
- Automatic low aggregate shutdown
- Integrated cement hopper with built-in fluffer
- Heated emulsion pump (hot water supplied by radiator)
- Additive tank/pump system
- Quick-open Teflon insert emulsion valves
- Pavement fog sprays and joint sprays
- Automatic variable amplitude hydraulic hopper vibrator
- Rotameter sight flow gauges for water/additive
- Direct drive jackshaft system
- Emulsion self-loading
- Quick cleaning emulsion basket strainer
Power
- John Deere turbo-charged diesel, 104 kw @ 2400 rpm (140 hp)
- Hydraulic quad pumps variable displacement, pressure and flow compensated, combined 490 liters/min @ 2400 rpm (130 gpm)
- Emulsion Pump - 2" variable displacement and hot water jacketed with a flow rating of 333 liters/min. (88 gpm)
- Water Pump - 113 liters/min. (30 gpm)
- Additive Pump - stainless steel, 45 liters/min. (12 gpm)
- Pugmill - double shafted Magna gun-barrel design with 46 removable auger paddles. Variable mixing speed, 260 rpm standard
Options
- Electronic water and additive flowmeters
- Caltrans approved material monitoring and control system
- High pressure washer/reel
Last Updated (Thursday, 23 December 2010 10:48)